WoodMac: Bifacial solar poised to surge ten-fold by 2024
Bifacial PV stands on the edge of a boom across the world’s four corners as cost improvements and geopolitics strengthen the case for the budding technology, according to Wood Mackenzie.
Bifacial PV stands on the edge of a boom across the world’s four corners as cost improvements and geopolitics strengthen the case for the budding technology, according to Wood Mackenzie.
The Chinese module giant has committed to sourcing 70% of its energy from renewables by 2023 and all of it by 2025. If serious, that could represent confidence in the amount of new renewable energy generation capacity to come online in China given the company’s huge production capacity expansion plans.
Risen Energy has announced a 148 MW module order will be completed this month as the Ningbo-based company expects to ship almost 1 GW of product to the country this year.
The thin-film manufacturer and Chinese carmaker Joylong Automobile applied thin film cells to the roof of a small commercial vehicle which was tested for a month. Hanergy says its K-Car could offer an effective daily range of 50-100km without charging.
After the “June rush” to complete solar projects in China – as well as the commissioning rush in Vietnam, which saw higher-than-expected demand of 4 GW in the first half – the growth of the regional solar market started to slow down in July and August, before anticipated Chinese demand picks up the slack again. With unexpectedly low demand in the third quarter, module manufacturers reacted first by marginally reducing utilization rates. Cell producers then cut production after cell prices collapsed.
Leading CdTe thin-film PV module manufacturer and ‘Solar Module Super League (SMSL), First Solar has secured a multi-year supply deal for its Series 6 CdTe thin film modules for five projects across Texas and California with developer Intersect Power.
PV Evolution Labs (PVEL) and Heliolytics have partnered to provide the first comprehensive testing and evaluation services to PV power plant owners and operators when extreme weather and other force majeure events have damaged plants. The partners are launching the service at Solar Power International in Salt Lake City.
Japanese carmaker Honda has clinched the car industry’s supposedly “largest” renewable energy deal, signing a duo of virtual power purchase agreements (VPPAs) for 320MW of wind and solar to power its US operations.
Leading CdTe thin-film PV module manufacturer and ‘Solar Module Super League (SMSL), First Solar expects to start volume production at its second US manufacturing plant in early 2020, restoring its bragging rights as the largest PV module manufacturer in US and western hemisphere.
The facility is set to open this year and will offer battery suppliers digitalization research and manufacturing consulting. Smaller manufacturers will be able to use shared laboratories for research.
Hanwha Q CELLS has celebrated the grand opening of what it bills as the “largest” solar panel factory in the western hemisphere, a US$200 million facility in Dalton, Georgia, meant to supply 1.7GW to the US market every year.
Polysilicon manufacturer Daqo has announced the start of pilot production in Xinjiang and expects to ramp up to full output by the end of the year, doubling the company’s annual capacity to 70,000 MT. Some 90% of its poly will be mono by that stage and Daqo expects 40% to be suitable for n-type products next year.
Canadian Solar has attained what it describes as a new milestone for PV cell conversion efficiency, taking five months to break its own record in the field.
LONGi Solar has bagged yet another order for its high-efficiency module line Hi-MO 4, now set to power a utility-scale project in Vietnam.
Credibility comes not just from offering products that generate clean electricity, but also from the way in which those products are manufactured, says SMA Solar Technology CEO Jürgen Reinert. Here, transparency and sustainability are key. That’s why one of the world’s largest PV inverter producers has partnered with pv magazine’s UP sustainability initiative. In the following Q&A, Reinert lays out what SMA is doing to step UP its green game.
Indian module manufacturers are gearing up for an end-of-year surge in solar project procurement and hoping their investments in incorporating global manufacturing benchmarks will translate into enhanced sales.
Solaria Corporation is to work towards a doubling of its panel manufacturing capabilities this year, a push financed by a new capital raise.
The U.S. company claims its 300 MW manufacturing plant in Hyderabad will deliver fully integrated, customizable solar panel, lithium battery pack and controller systems under a single roof.
The German PV equipment provider will not achieve the sales and earnings targets set for this year. CNBM is not expected to place orders for the expansion of its CIGS thin-film production operations in China until the fourth quarter.
The GCL System chief executive made comments that fly in the face of an expected solar gold rush in China that analysts predict will start this month. Though rising overseas demand will address overcapacity fears, according to Luo, the soundbite is sure to chill PV boardrooms across the world’s biggest solar market.
Major PV materials supplier, Heraeus Photovoltaics has collaborated with German company, Cell Engineering to develop metallisation pastes for its ‘LECO’ (Laser Enhanced Contact Optimization) technology that can increase multiple solar cell architectures conversion efficiencies by up to 0.15%.
The polysilicon maker has turned a quick $160 million profit from the sale of its stake in a fund it paid $189 million to establish just five months ago. The heavily indebted manufacturer needs to raise funds to pay for its production capacity expenditure.
After more than six years of scientific and technical research efforts in the solar sector, the Qatar Environment and Energy Research Institute (QEERI) is now targeting a major role in the industry itself.
The nation’s thriving distributed generation market is flying, as was evident at last week’s Intersolar South America trade show. The sector seems unconcerned by mooted changes to net metering incentives in the new year and when even an environmental non-believer like President Bolsonaro is on side, it is difficult to be pessimistic.
Fraunhofer ISE has worked with German technology companies to improve the metallization process in silicon solar cells. The result could drive down module costs quite a bit.
While the rest of China’s solar manufacturers take on ever more debt to expand their production lines as fast as possible, Comtec said it is ready to sell off fabs for the right money and will instead focus on project sales and lithium battery and EV business opportunities.
With the Turkish government having given Kalyon Enerji another three years to build the 500 MW facility it won a tender to construct with former partner Hanwha Q Cells, Ankara has now committed a $333 million “super incentive” to the fab.
The Ningbo-based manufacturer shipped more than a quarter of the panels it exported in the first six months of the year to the eastern European nation. All the big manufacturers posted rising shipment volumes as emerging markets made up for slow growth in their homeland.
The District Court of Dessau-Roßlau yesterday confirmed self-administered insolvency proceedings have been conducted at the German thin-film CIGS module manufacturer and a provisional administrator has been appointed.
German energy agency Dena has found China’s smelter fleet could shift 432.5 GWh of daily demand to more amenable hours to tally with renewables generation. To make it happen though, the regulator needs to lay down rules for providing incentives.