What Is Solar-Log WEB Enerest?
Solar-Log WEB Enerest is the cloud solar monitoring portal of Solar-Log GmbH, whose data loggers (reviewed separately) feed it.
The portal does not read inverters itself: a logger on site collects inverter, meter, sensor and battery data and sends it to the cloud.
Solar-Log WEB Enerest 4 is the paid cloud portal for Solar-Log data loggers and two third-party models. It gathers a fleet into one control center, flags inverters, MPP trackers and strings that fall behind, turns alarms into tasks and emails scheduled reports to clients.
It is built for installers and O&M firms that manage many plants and give each customer a plant-owner login. It is a poor fit for plants without a compatible logger, single-brand homes already covered by the inverter maker's free app, and utility-scale operators who need SCADA or full solar asset management.
Pros and Cons
Pros
- Mixed-brand fleets run in one portal, since the logger supplies the data.
- String-level detection catches weak strings that plant-level checks miss.
- Alarms become tasks in the same portal, keeping faults and service notes together.
- A performance ratio without an irradiance sensor saves sensor hardware on smaller plants.
- ISO 27001 certification helps when clients audit data security.
- Scheduled email reports keep clients informed without manual work.
Cons
- Requires a Solar-Log data logger or one of the few supported third-party loggers (Huawei SmartLogger, meteocontrol blue'Log X).
- No public price list; the annual per-plant fee is quoted by sales.
- Not built for utility-scale operators needing SCADA or full asset management.
- Program extensions and some data exports cost extra on top of the annual fee.
- WEB Enerest 3 reports were not migrated and must be rebuilt in version 4.
Features
Control Center
A portfolio overview of every plant's status and open alarms.
Deviation Detection
Unlimited rules compare inverters on kWp-normalized power and flag deviations down to MPP tracker and string level.
Alarm Pages
Graphs and weather at the time of each fault; alarms can be archived in bulk or turned into tasks.
Reports
Balance, inverter-yield, KPI and daily alarm reports as PDF or email, from standard or custom templates.
Analysis Views
10+ ready-made and custom views, plus KPIs such as specific yield and technical availability.
Task List
Per-plant tasks with comments and a progress overview.
Pinboards
Dashboards from 85+ widgets, shown as slideshows or embedded on websites and digital signage.
Weather-Based PR
Irradiation from weather models gives a performance ratio even without an irradiance sensor.
Solar-Log WEB Enerest Pricing
Solar-Log publishes no price list for WEB Enerest 4; a sales representative quotes the fee individually.
Annual Plant Fee: Portal use is billed yearly in advance for each plant or registered Solar-Log, and the contract renews for another year unless cancelled 3 months before it ends.
No Free Tier: The free WEB Enerest M package for plants up to 30 kWp belonged to the older WEB Enerest 3 portal; under the current terms all portal use is subject to a fee.
Extra Charges: Program extensions, special customer requests and some data exports cost extra on top of the user fee.
Free Demo Portal: Registration for the demo portal is free, so teams can explore the interface before signing a contract.
Mobile App: Enerest ToGo is a free download for iOS and Android.
Hardware: The on-site logger and any communication devices are paid for separately.
Integrations
Device support is mostly a matter of the logger on site: the portal shows what the logger reads.
- Inverter Manufacturers: SMA, Fronius, Huawei, SolarEdge and others, read by the on-site logger rather than the makers' clouds.
- Battery Storage Systems: Monitor charging, discharging, and storage performance.
- Smart Energy Devices: Heat pumps and EV chargers are shown; the Solar-Log logger on site switches them.
- Sensors and Meters: Irradiance, module and ambient temperature, wind speed and energy meter readings.
- Third-Party Loggers: Huawei SmartLogger and meteocontrol blue'Log X can replace a Solar-Log logger.
- API Access: Portal and Plant APIs in Basic or Advanced packages, booked separately; day queries return 5-minute values.
How to Set Up Solar-Log WEB Enerest
- Install a Solar-Log logger or a supported third-party one and connect it to the inverters and meters.
- Get portal access from Solar-Log, which issues login data once you accept its offer; plant owners usually get a login from their installer.
- Register the solar installation and configure system parameters.
- Connect the logger to the internet for cloud synchronization.
- Set up monitoring rules, report schedules and pinboards.
- Install the Enerest ToGo app to get error alerts on your phone.
How to Use Solar-Log WEB Enerest
Service teams start in the control center and decide on each alarm page whether to archive the alarm or open a task. Many faults need no site visit: the portal sends firmware updates, fetches diagnostic files and reconfigures HTTP plants remotely.
Balance and KPI reports go to clients by email each month or year (the balance report also weekly). Plant owners see only their own plant, with energy flow, self-consumption and yield, in the portal or the Enerest ToGo app.
What You Can Manage with Solar-Log WEB Enerest
- Fleets and Users: Fleets, virtual plants and per-plant access for staff and customers.
- Error and Event Logs: Track equipment faults and communication issues.
- Energy Flow Tracking: Follow battery charging, EV charging and self-consumption.
- Fleet Balance: Yield against target, PR, technical availability, feed-in revenue and savings, added up per fleet.
- Plant Documentation: Keep plant details, assigned components and a timeline of significant changes.
FAQs
What does Solar-Log WEB Enerest do?
It collects data from on-site loggers, flags underperforming inverters and strings, turns alarms into tasks and sends scheduled reports for single plants or whole fleets.
Who is Solar-Log WEB Enerest best for?
It is best for installers and O&M firms managing many Solar-Log plants. Homeowners usually get a login from their installer; utility-scale operators needing SCADA should look elsewhere.
Is Solar-Log WEB Enerest free?
No. Use of the portal is subject to an annual fee per plant, which Solar-Log quotes individually. The Enerest ToGo app is a free download, and registration for the demo portal is free.
Does Solar-Log WEB Enerest support integrations?
Yes. Inverters, batteries, meters and sensors come in through the on-site logger; Huawei and meteocontrol loggers report directly. A Portal and Plant API can be booked, and Solarfox displays, Climkit billing and LaMetric are connected.
What are the main limitations of Solar-Log WEB Enerest?
Every plant needs a Solar-Log or supported third-party logger and an annual fee that renews unless cancelled 3 months ahead. The API is booked separately, and WEB Enerest 3 reports were not migrated to version 4.
What are the best alternatives to Solar-Log WEB Enerest?
The closest rival is meteocontrol VCOM, which also pairs its own loggers with a portal. Single-brand plants are covered, mostly free, by SMA Sunny Portal, Fronius Solar.web, Enphase Enlighten or Huawei FusionSolar. Solytic connects to existing inverter accounts without extra hardware, and Power Factors targets large portfolios.




